Where To Get A Pool Vacuum Cleaner Repaired

pool-cleaner-not-working
Automatic pool cleaners are an integral part of pool maintenance. Disaster strikes and time comes to a standstill if your pool cleaner stops working. No matter if you lot have a suction, pressure or robot puddle cleaner, at one point you volition have puddle cleaner problems such as those discussed beneath.

There are 3 principal types of pool cleaners: suction, force per unit area and robotic. Suction cleaners connect into a suction line like the wall skimmer, or a dedicated cleaner line that is sucking water into the filter pump. Pressure level cleaners operate on the pressure side of the filter pump — that is, they are powered by h2o being pushed to the cleaner, ordinarily past a split up booster pump. Robotic cleaners are contained of the filter pump; they operate nether their own power and don't rely on the suction or pressure of your filter pump.

This web log postal service on the tiptop puddle cleaner problems covers all three automatic pool cleaner types.

Suction Pool Cleaner Does Not Move

Suction pool cleaners are powered by your pump water menstruation when the pump is operating; they cover the whole pool in a random pattern but just while the pool apportionment system is on.

To address a suction pool cleaner that is not working, the first step is to check the cleaner hose to make sure it is firmly attached to the suction line in the skimmer or to the dedicated cleaner line if your pool is equipped with one.

The second step is to check the hose sections to make sure at that place are no air leaks, either where the hose sections join together or from splits or holes in the hose.

You may need to close downwardly or restrict other suction lines, such as the chief drain or another skimmer, to increment the suction on the line the cleaner is continued into.

Problems to check for:

For depression suction force per unit area, ameliorate depict past closing drain and other suction lines.
Dingy pump handbasket or skimmer basket, or inline strainer basket.
Cleaner stuck onto high spot in the pool floor.
Cleaner stuck onto floor drains or pop-upwards in-floor cleaner heads.
Air leaks in cleaner hose, or on pipes in front of filter pump.
Clog in the cleaner head or hose; check for obstruction.
Depression or high pool filter force per unit area approximate readings, indicating flow bug.
Bad connection to skimmer, not making a tight seal of hose to skimmer.
Problems with automatic featherbed valve or skimmer connexion devices.
Failed or stuck diaphragm or flapper in the cleaner head.

Suction Pool Cleaner Is Slow

Usually the primary reason for this kind of dysfunction is a congested pool filter or a clog at the intake hole at the lesser of your pool cleaner. To make clean the intake hole, but flip the cleaner over underwater and look down into the intake hole. Yous will also desire to make certain there are no obstructions in the hose and that all hose connections are tight and secure.

The next step is to clean your skimmer basket, pump basket, and pool filter. If there are leaves or rocks trapped in there, information technology will reduce your pump's water flow, which in turn will slow down a suction puddle cleaner.

When a suction cleaner is sluggish or wearisome, it'due south commonly a clogged pump basket or muddied filter that is to arraign. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing h2o-flow volume. A worn footpad or a worn seal tin also reduce cleaner speed and cause information technology to stick to the puddle floor. Finally, check that the suction valves are open to requite all suction pressure to the skimmer connected to the cleaner.

Suction Cleaner Is Too Fast

Suction pool cleaners piece of work based on your pool pump water flow. If you have an peculiarly powerful pool pump or your water flow is exceptionally fast, your pool cleaners may move faster than usual. This can cause your cleaner to skip over some debris as information technology "flies" around the pool.

Near suction cleaners have a device in the skimmer that will permit you to control the menstruum, or if you have other incoming suction lines such equally a main drain or secondary skimmer. Opening these lines more than fully will reduce the flow from the line that the cleaner is connected to.

Suction Cleaner Does Not Comprehend Unabridged Pool

The solution to this issue may exist as simple as checking the hose length. In order for the pool cleaner to be able to reach all areas of your puddle, the hose should be long plenty to reach from the skimmer or dedicated suction line to the farthest point in the puddle with iii anxiety to spare. If the suction hose is not long plenty, consider calculation extra lengths of hose.

Adjustments to the direction of the return jets in your pool can affect cleaner coverage. Your returning h2o may be pushing your cleaner away from certain areas.

If the hose length or render flow is not the problem, consult your owner's manual for slight adjustments to the hose or cleaner, which will create a different cleaning pattern.

Air Bubbles Enter Puddle at Return Line

This problem may be acquired by air leaks in the hose or the connections. If the vacuum connections are not fitted together tightly or the hose is punctured, air will leak into the organisation, causing bubbles to announced at the render wall fitting.

Check the hose and vacuum connections for any air leaks; the vacuum connections can exist tightened and secured with O-rings and hose leaks can exist easily fixed with silicone or safe cement (which looks meliorate than duct tape!).

Suction Cleaner Gets Stuck on Steps/Ladders

About suction cleaners have a device that snaps onto the throat of the cleaner to keep it from getting stuck on steps. This is an aftermarket item for some cleaners.

If your cleaner is getting stuck on or under your pool ladder, you may consider installing a Ladder Guard Kit. If it sticks on a raised main bleed cover, look at the UniCover, which creates a shine transition from flooring to drain.

You can likewise make adjustments to the hose floats or hose weights (depending on model), to change the cleaning blueprint.As a concluding resort, placing a pocket-sized boulder of the right size in the area or shortening the pool cleaner hose can assist.

If your pool cleaner gets stuck on the primary drain cover because information technology'southward raised above the flooring, Polaris makes a product chosen the Unibridge to proceed your cleaner from getting stuck on raised floor fittings.

For suction cleaners that become stuck on convex or concave spots on the pool floor, reducing the speed of the cleaner can help. For gunite pools, a more drastic method would be to shave off the plaster or make full in with more plaster in that area to make information technology smoothen.

Visit our pool cleaner parts section for any spares you need, or for more ideas to keep your puddle cleaner from getting stuck. This article on poolcleanerhub may help.

Pressure Pool Cleaner Does Non Move

Pressure pool cleaners demand to have about xxx PSI to operate (17 PSI for low-pressure cleaners like the Polaris 360 or Letro Fable II). Check that the booster pump is operating and the filter pump should also be running at the same time.

Pressure cleaners have an in-line strainer (some accept two) that needs to exist cleaned periodically. This may be located in the wall fitting connectedness or in the feed hose.

Rocks or sand tin become lodged in the wheels of a pressure level cleaner, preventing movement. Likewise, tiny grains of sand or plaster can make their way around in-line strainers (particularly if you've lost yours!) and can clog upward pocket-size orifices inside the cleaner.

Pressure cleaners may be shaft driven, belt driven or chain driven. Either one of these power trains tin take bug. Generally speaking, these are working well if y'all turn one bike and the other wheels turn at the same fourth dimension and speed.

Force per unit area Puddle Cleaner Is Slow

Check the in-line strainer(south) for debris that is slowing down the water flow to the cleaner. Too check the hose, to make sure that pressure is non beingness lost somewhere along the line. Slight water loss effectually the hose swivels is normal.

Loose wheels or loose drive belts can cause your cleaner to acquit sluggishly. Worn tires will reduce speed and wall climbing ability. Damaged or missing wheel bearings tin can cause dull movement. Check your owner's transmission for specific adjustments for your particular pressure puddle cleaner.

Force per unit area cleaners are powered past h2o, so when they are sluggish, or moving slowly, the problem is usually flow related. Cheque the filter screens, located at the wall zipper, and in the hose on some newer models. If a booster pump is being used, be certain that both filter pump and booster pump are operating and aren't leaking or making funny noises.

With the booster pump running, kneel down next to the puddle and catch the pool cleaner hose, and slowly pull the cleaner toward you lot, inspecting the hose for leaks as you lot pull it out of the water (some leakage at swivels is normal). When yous reach the cleaner caput, agree information technology just to a higher place water and audit it for water moving through three areas: out the rear thrust jet, out the sweeper tail and spraying up into the droppings bag. The thrust jet and sweeper tail should shoot h2o 15-20 feet. Likewise, if y'all remove the debris purse, water should spray upward 15-20 feet in the air. If the water is spraying properly out all 3 exits, you likely practice not have a water pressure trouble, but a trouble with the drive belts slipping, a cleaved axle, or worn (rounded) tires — or something stuck between the wheels and the cleaner body.

Pressure level Cleaner Does Not Cover Entire Pool

For this problem, all you demand to do is conform the thrust jet, located on the dorsum center, where the water sprays out. The default setting is 11 o'clock, but placing it at 1 o'clock volition give the cleaner an opposite cleaning pattern.

The feed hose of course must be long enough to reach the farthest betoken from the wall connectedness, plus 3 feet. Make certain that the feed hose is floating; old-manner hose floats can become water logged and not keep the hose up on the surface.

Slipping wheels can cause a pressure cleaner to go stuck in the deep finish and not have the strength to pull itself back up into the shallow end. Check chugalug tension or axle adjustments on newer models, or the front wheel "teeth" on older Polaris and Letro models. Ray Vac models can circle the deep end when the debris pocketbook or screen is full.

Strong pressure level from wall or flooring returns tin push a cleaner away from certain areas. In such cases, redirecting the eyeball fittings or nozzle can set up the problem.

Pressure Cleaner Does Not Move

Possible causes of this trouble are:

Booster pump is off, or filter pump is off.
Booster pump has an air lock or failed shaft seal.
Bulldoze belts or wheel axles are cleaved or loose.
WMS (H2o Management System) has asunder or cleaved hoses.
Feed hose or sweeper tail has splits or holes.
Puddle toys or sticks have become wedged betwixt wheels and body.
String or wire has gotten wrapped around the axle.
Backup valve is malfunctioning, constantly releasing water.
Inline strainers are clogged.
Small bits of sand or grit have worked themselves into the WMS, clogging tiny orifices.

Pressure Cleaner Gets Stuck on Steps/Ladders

If your pressure cleaner gets stuck on the stairs try to adjust the thrust jet to create a new cleaning pattern. If you cleaner gets wrapped around a handrail or stuck backside a ladder, install ladder guards to block the path around these rails.

If the cleaner is going backside ladders or handrails and getting stuck, you can use ladder guards, made by Polaris, Pentair and others. Several designs are used, the best being the one made by the manufacturer of your pool cleaner. Some other selection is to remove the ladder, if information technology's rarely used, or shorten the cleaner hose just slightly for entry step handrails. Suction cleaners often have a large ladder guard, usually a large ring, that tin can be fitted around the cleaner.

For pool cleaners that go stuck in a corner of the pool or stuck up confronting a step, grinding away, endeavor to change the direction or cleaning design of the cleaner, which tin be accomplished by thrust jet adjustments, hose bladder adjustments, or adding hose floats or hose weights.

As a last resort, placing a small boulder of the correct size in the area or shortening the pool cleaner hose tin assist. Annotation that most pressure pool cleaners accept reverse mechanisms or backup valves to reverse the cleaner management every few minutes and foreclose stalled functioning. If equipped, check that your backup valve is working.

Pressure Cleaner Feed Hose Becomes Tangled

Mensurate the hose to ensure that information technology is adjusted to the proper length for the pool size — too much hose will cause tangling. Yous likewise demand to make sure that the feed hose is floating. Waterlogged hose floats should be replaced. The hose swivels should rotate freely. Some other possibility is that non all wheels are being powered. Rotate i of the wheels when the cleaner is in OFF mode and make sure that all wheels turn together.

Too much power to a force per unit area cleaner can cause it to fly around the pool and tangle itself. Drain off excess pressure level at the wall plumbing fixtures. If the thrust jet is in a ix or 3 o'clock position, this volition create a circular pattern, which may crusade tangling. Visit our puddle cleaner parts section for all of the parts mentioned.

If your pool cleaner hose has been hanging on a hook all winter, or has been stored tightly coiled, it can develop a memory that causes the hose to twist and tangle. I solution is to stretch the hose out straight along the pool deck in the hot sun, using weights if needed, to allow it to straighten. A concluding resort may be to replace some hose sections.

Robotic Pool Cleaner Does Not Move

Robotic puddle cleaners are electric, and don't rely on your pump'due south suction or pressure level to move around the puddle. The floating power cord for your robotic pool cleaner should exist firmly plugged into the power supply transformer, which is plugged into an outlet. The power supply should take an indicator low-cal showing that power is existence received.

If power is being received to the power supply, but the cleaner is not moving, we need to trace the trouble toward the cleaner. The problem lies where the power dies. Many times, the power cord itself tin can accept a short, where the wires accept broken, inside the rubber casing. This usually occurs at a point near the cleaner, where the stress on the string is the greatest. If you have a dog that goes later the robot, look for bite marks in the cord!

If the cord is intact, you tin examination the resistance of the wire with a test meter (ready on Ohms) to ensure that the cord wires are not an issue. At this betoken, you will want to check the drive motor itself, to make sure connections are tight, and using your exam meter, check that the power is reaching the motor. If information technology is, and the motor is not responding to the power, this may be signaling the need for a new bulldoze motor.

Is the transformer ability indicator lite on? Bank check that outlet breakers are on.
Inspect cleaner power cord and plug for harm from animals, or kinks, knots or cuts.
Inspect ability cord attachments on the pool cleaner, and connection into motor or last board.
Inspect drive tracks, drive belts and pulleys for alignment, tightness and wear.
If bulldoze belts were recently replaced, be sure that they follow the correct pattern.
Dirty internal filters or an improperly fastened lesser plate can stop a robot cleaner.
Debris may exist wrapped around the propeller or bike assembly, such as hair, string or small-scale sticks.

Robotic Pool Cleaner Is Slow

This is ordinarily a trouble of loose drive tracks, loose bulldoze belts or missing pocket-sized parts that continue tension on the belts and tracks. You may notice that it moves but doesn't climb the walls any more than. This could indicate worn bulldoze tracks or wheel tube brushes.

Since robotic cleaners are not hydraulically powered, slow performance is less of a problem. When it occurs, however, the cause can exist a full droppings handbag or filter, or the bulldoze tracks or wheels have get worn or rounded, or are loose or out of alignment. Check all the belts and pulleys for proper position and tension, and the wheels for proper alignment and move.

Robotic Cleaner Gets Stuck

If your floor surface is not so shine, you may find the cleaner getting stuck on high spots. Some newer models have adjustments that will raise the cleaner slightly, but this may compromise its vacuuming ability. Robot cleaners tin as well get stuck behind ladders and handrails, and like our other pool cleaners above, you lot tin solve this trouble with a production called a Ladder Guard, or using the Unibridge when "loftier-centered" on the master drain.

More Troubleshooting

If everything has failed and your pool cleaner is being stubborn and is refusing to cooperate, it may be time to call i of our puddle specialists/advisers who tin assist with y'all further with troubleshooting or repair. Of grade, our specialists can likewise help you select a new pool cleaner if you lot'd rather just offset over.

Most of the fourth dimension, your puddle cleaner but needs a few tweaks hither or there, or some puddle cleaner parts, and it's off and running once again.

Pool CLEANER IS NOT CLEANING

If your puddle cleaner is moving around the puddle normally just is non picking up debris, the normal solution is to clear the clog in the suction throat, or empty the debris bag or basket. Suction cleaners as well need a make clean pool filter to both motion and vacuum well.

If your puddle cleaner is not cleaning the unabridged pool, only leaving some areas untouched, there is often an aligning that can exist fabricated to the cleaning design or cleaner speed. Increasing the pool cleaner speed is possible on pressure cleaners past closing the bleeder valve at the wall connection. For suction cleaners, closing other valves while using the cleaner and keeping the basket clean can improve speed. If your puddle cleaner seems slower than normal, wait for the cause of the pressure loss (or suction loss).

Changing the pool cleaner pattern is accomplished on pressure cleaners by adjusting the thrust jet on the rear of the cleaner. If gear up at xi o'clock, move it to 1 o'clock, or vice-versa, to change the rotation or direction of most turns. For suction cleaners, adjusting the hose floats and hose weights can change the cleaner pattern. Also, strong wall return jets can push a cleaner away from sure areas, using 90-caste hose adapters and pointing them straight downward is often needed in such cases. Finally, if your cleaner hose or power cablevision is not long plenty to reach all areas of the pool, add more hose length to accomplish all areas, or motility the robotic cleaner power supply to a more central location.

Puddle CLEANER IS Non CLIMBING WALLS

Just like above, when a puddle cleaner does not climb the walls (and it used to practise information technology), there is a trouble with the cleaning pattern or cleaner speed. Making adjustments to the cleaner design as described above may produce different results, allowing the cleaner to make a ameliorate approach to the wall. Adjusting the cleaner speed is some other way to overcome problems climbing the pool walls. It takes a neat deal of traction and suction to climb a pool wall without falling off. If information technology'south not climbing the walls like it used to, it'south probably also going slower. Be sure in that location are no pressure leaks or suction leaks in the hose that connects to the cleaner and that the hose is not getting in the way. Tangled pool cleaner hoses are commonly the event of waterlogged hose floats, not enough hose floats or incorrect placement of hose floats.

rosie-robot-cleaner from the Jetson's Pool cleaners require timely replacement of pool cleaner parts to operate at their full potential and prevent more catastrophic failure from occurring. If your pool cleaner is beyond repair and information technology's time for a new one, check out our pick of over 100 puddle cleaners, in stock and set to transport!

Happy troubleshooting!

ayesha-2

Ayesha Aslam
InTheSwim Staff Blogger

SHOP RELATED PRODUCTS